This device is NOT RECOMMENDED for future use with balkanpoliticalclub.net due to low flash/ram.
Bạn đang xem: Download for tl
DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend lớn flash an up-to-date and secure balkanpoliticalclub.net version (18.06 or later) onto it! See 4/32 warning for details.
1) This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation.This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See balkanpoliticalclub.net on 4/32 devices what you can vì now.
2) balkanpoliticalclub.net support for this device will kết thúc after 2019.19.07 will be the last official build for 4/32 devices. After 19.07, no further balkanpoliticalclub.net images will be built for 4/32 devices. See balkanpoliticalclub.net on 4/32 devices what you can vì chưng now.
Note1: The TL-WR841N is identical except that the antennas are not detachable. TP-Link naming scheme is, that devices ending in a D have detachable antennas.Note2: v5.2, v5.4 etc. are all v5, similarly for v7, v8, v9. The only difference is the firmware version they come with.
Sometimes, version x. is only available in the PRC and version y. is intended for sale world-wide. The hardware between version x. & version y. can differ significantly but does not have sầu khổng lồ.
Sometimes, there is Version x. for PRC only & Version x. for world-wide sale. If there is a special chinese-Version with the same major-number, then that version has usually significantly different hardware
Community builds
balkanpoliticalclub.net 19.07 ath79 tiny, including LuCI, see this forum thread.
Over 500 days
The TP-Link TL-WRN841N(D) running over 500 days on an Enterprise Level
https://www.dropbox.com/s/lfi35i2toc1iwhv/lede524days.png?dl=0
| Instruction set: | MIPS | ||||||||
| Vendor: | Atheros | MediaTek | |||||||
| bootloader: | uboot | ||||||||
| System-On-Chip: | AR9130 | AR7240 rev 2 | AR7241-AH1A | AR9341 | QCA9533-AL3A | QCA9533-BL3A | QCA9533-AL3A | MT7628NN | |
| cpu Frq: | 400 MHz | 535 MHz | 550 MHz | 650 MHz | 575 MHz | ||||
| BogoMIPS: | 265.42 | 265.42 | 265.42 | 266.64 | 366.18 | 432.53 | 385.84 | 385.84 | |
| Flash-Chip: | ST 25P32V6Phường | Hynix | Eon EN25F32-100HIP.. | Spansion FL032PIF | Winbond 25Q32FVS1G | Spansion FL032PIF | GigaDevice 25Q64CSIG | GigaDevice 25Q32CSIG | |
| Flash size: | 4 MiB | 8 MiB | 4 MiB | ||||||
| RAM-Chip: | Hynix HY5DU561622FTP-5 | Zentel A3S56D40ETP-G5 | ESMT M13S2561616A-5T | Winbond W9425G6JH-5 | Zentel A3S56D40GTP-50 | Zentel A3S56D40GTP-50L | ESMT M14D5121632A -2.5B / Winbond W9751G6KB-25 | Zentel A3S56D40GTP-50L | |
| RAM size: | 32 MiB | 64 MiB | 32 MiB | ||||||
| Wireless: | Atheros AR9100 Rev:7 | Atheros AR9280 Rev:2 | Atheros AR9287-BL1A 2.4GHz 802.11bgn | AR9341 | QCA9533-AL3A | QCA9533-BL3A | QCA9533-AL3A | MT7628NN | |
| switch: | Marvell 88E6060 | AR7240 built-in | AR7241 built-in | AR9341 built-in | QCA9533-AL3A built-in | QCA9533-BL3A built-in | MT7628NN built-in | ||
| USB: | 1.1 thủ thuật | 2.0 mod | 2.0 thủ thuật | No | No | 2.0 mod | No | ||
| Serial: | Yes | Remove R26 | Remove sầu R26 và bridge R23 | Yes | |||||
| JTAG: | Yes | Yes | No |
The port indexes in balkanpoliticalclub.net and in hardware (on the case) are mangled (at least in Barrier Breaker):
It is possible to lớn run 802.1Q tags on these ports. As of Chaos Calmer mixed (tagged/untagged) VLANs are working, and can be configured via LUCI.The maximum VLAN number is 15
eth1 is directly connected khổng lồ the WAN port.
Xem thêm: Color Gamut Là Gì ? Độ Bao Phủ Màu Là Gì
| TL-WR841N(D) | 1, 1.5 | 18.06.9 | http://downloads.balkanpoliticalclub.net/releases/18.06.9/targets/ar71xx/tiny/balkanpoliticalclub.net-18.06.9-ar71xx-tiny-tl-wr841-v1.5-squashfs-factory.bin | http://downloads.balkanpoliticalclub.net/releases/18.06.9/targets/ar71xx/tiny/balkanpoliticalclub.net-18.06.9-ar71xx-tiny-tl-wr841-v1.5-squashfs-systăng cấp.bin |
| TL-WR841N(D) | v10 | 18.06.9 | http://downloads.balkanpoliticalclub.net/releases/18.06.9/targets/ar71xx/tiny/balkanpoliticalclub.net-18.06.9-ar71xx-tiny-tl-wr841-v10-squashfs-factory.bin | http://downloads.balkanpoliticalclub.net/releases/18.06.9/targets/ar71xx/tiny/balkanpoliticalclub.net-18.06.9-ar71xx-tiny-tl-wr841-v10-squashfs-sysnâng cấp.bin |
| TL-WR841N(D) | v11 | 18.06.9 | http://downloads.balkanpoliticalclub.net/releases/18.06.9/targets/ar71xx/tiny/balkanpoliticalclub.net-18.06.9-ar71xx-tiny-tl-wr841-v11-squashfs-factory.bin | http://downloads.balkanpoliticalclub.net/releases/18.06.9/targets/ar71xx/tiny/balkanpoliticalclub.net-18.06.9-ar71xx-tiny-tl-wr841-v11-squashfs-sysupgrade.bin |
| TL-WR841N(D) | v12 | 18.06.9 | http://downloads.balkanpoliticalclub.net/releases/18.06.9/targets/ar71xx/tiny/balkanpoliticalclub.net-18.06.9-ar71xx-tiny-tl-wr841-v12-squashfs-factory.bin | http://downloads.balkanpoliticalclub.net/releases/18.06.9/targets/ar71xx/tiny/balkanpoliticalclub.net-18.06.9-ar71xx-tiny-tl-wr841-v12-squashfs-sysnâng cấp.bin |
| TL-WR841N | v13 | 19.07.7 | http://downloads.balkanpoliticalclub.net/releases/19.07.7/targets/ramips/mt76x8/balkanpoliticalclub.net-19.07.7-ramips-mt76x8-tl-wr841n-v13-squashfs-tftp-recovery.bin | http://downloads.balkanpoliticalclub.net/releases/19.07.7/targets/ramips/mt76x8/balkanpoliticalclub.net-19.07.7-ramips-mt76x8-tl-wr841n-v13-squashfs-sysupgrade.bin |
| TL-WR841N | v14 | snapshot | ||
| TL-WR841N(D) | v3 | 18.06.9 | http://downloads.balkanpoliticalclub.net/releases/18.06.9/targets/ar71xx/tiny/balkanpoliticalclub.net-18.06.9-ar71xx-tiny-tl-wr841-v3-squashfs-factory.bin | http://downloads.balkanpoliticalclub.net/releases/18.06.9/targets/ar71xx/tiny/balkanpoliticalclub.net-18.06.9-ar71xx-tiny-tl-wr841-v3-squashfs-sysupgrade.bin |
| TL-WR841N(D) | v5 | 18.06.9 | http://downloads.balkanpoliticalclub.net/releases/18.06.9/targets/ar71xx/tiny/balkanpoliticalclub.net-18.06.9-ar71xx-tiny-tl-wr841-v5-squashfs-factory.bin | http://downloads.balkanpoliticalclub.net/releases/18.06.9/targets/ar71xx/tiny/balkanpoliticalclub.net-18.06.9-ar71xx-tiny-tl-wr841-v5-squashfs-sysupgrade.bin |
| TL-WR841N(D) | v7 | 18.06.9 | http://downloads.balkanpoliticalclub.net/releases/18.06.9/targets/ar71xx/tiny/balkanpoliticalclub.net-18.06.9-ar71xx-tiny-tl-wr841-v7-squashfs-factory.bin | http://downloads.balkanpoliticalclub.net/releases/18.06.9/targets/ar71xx/tiny/balkanpoliticalclub.net-18.06.9-ar71xx-tiny-tl-wr841-v7-squashfs-sysnâng cấp.bin |
| TL-WR841N(D) | v8 | 17.01.7 | http://downloads.balkanpoliticalclub.net/releases/17.01.7/targets/ar71xx/generic/lede-17.01.7-ar71xx-generic-tl-wr841-v8-squashfs-factory.bin | http://downloads.balkanpoliticalclub.net/releases/17.01.7/targets/ar71xx/generic/lede-17.01.7-ar71xx-generic-tl-wr841-v8-squashfs-systăng cấp.bin |
| TL-WR841N(D) | v9 | 18.06.8 | http://downloads.balkanpoliticalclub.net/releases/18.06.8/targets/ar71xx/tiny/balkanpoliticalclub.net-18.06.8-ar71xx-tiny-tl-wr841-v9-squashfs-factory.bin | http://downloads.balkanpoliticalclub.net/releases/18.06.8/targets/ar71xx/tiny/balkanpoliticalclub.net-18.06.8-ar71xx-tiny-tl-wr841-v9-squashfs-sysupgrade.bin |
For DD(trunk) there is a change going on lớn remove sầu the “N” and “ND”-suffix from the imagename (only “-tl-wr841-v10.bin”).
Installing via website interface:
Log in to lớn router website interface and select the firmware image you just uploaded as an update.
Sit và wait while it flashes. It will reboot và be accessible at 192.168.1.1.
The Barrier Breaker image already includes a GUI, you vị not have to install it manually.
For v8...v13 TFTPhường install is much easier
Beware that this installation method needs a TTL màn chơi serial console usb khổng lồ TTL like DKU-5 data cable or RS232-TTL level shifter like this:
This is taken more or less verbatlặng from https://diễn đàn.balkanpoliticalclub.net/viewtopic.php?id=24203, thanks to lớn dl3daz.
Hook up the serial console as explained in the section “serial console”. At the prompt “Autobooting in 1 seconds” type “tpl” quickly to start a uboot console.
Now we need khổng lồ mix router & VPS IPhường. addresses (here named ROUTERIPhường. & SERVERIP., substitute these with the real IPhường addresses).
Type in the console:
setenv ipaddr ROUTERIPsetenv serverip SERVERIPprintenvFor example: Configure this static ip for your LAN card 192.168.1.100. If your computer containing other LAN or Wifi thẻ, disable it!
Type in the console
setenv ipaddr 192.168.1.111setenv serverip 192.168.1.100192.168.1.111 is the router ip, 192.168.1.100 is the TFTP.. VPS ip.
Uboot needs the tftp VPS to be listening on port 69. Make sure your VPS is configured lớn listen khổng lồ that port. Now we can load the firmware over TFTP. with “tftpboot 0x80000000 balkanpoliticalclub.net-ar71xx-generic-tl-wr841n-v8-squashfs-factory.bin”:
ar7240> tftpboot 0x80000000 balkanpoliticalclub.net-ar71xx-generic-tl-wr841n-v8-squashfs-factory.binUsing eth0 deviceTFTPhường from server 192.168.1.100; our IP.. address is 192.168.1.111Filename 'balkanpoliticalclub.net-ar71xx-generic-tl-wr841n-v8-squashfs-factory.bin'.Load address: 0x80000000Loading: checksum bad################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################################doneBytes transferred = 3932160 (3c0000 hex)
lưu ý the “3c0000” in the last line (your number may differ). Now exexinh tươi the following commands, if necessary replacing 3c0000 with the number you got from tftpboot
Type:
printenv bootcmdTake note of the address & use it as flash erase start address.
For TL-WR841ND v3:
1. Erase the flash:
ar7100> erase 0xbf020000 +0x3c0000 First 0x2 last 0x3d sector kích cỡ 0x10000 61 Erased 60 sectors 2.Copy RAM content to flash:
ar7100> cp.b 0x80000000 0xbf020000 0x3c0000 Copy khổng lồ Flash... write addr: bf020000 done 3.Reset
ar7100> remix Resetting...4. Done.
Xem thêm: Boss Nào Sau Đây Sở Hữu Kĩ Năng Phản Đòn? Đáp Án Trắc Nghiệm Bns
For TL-WR841ND v5, v7, v8, v9:
1. Erase the flash:
wasp> erase 0x9f020000 +0x3c00002. Copy RAM content khổng lồ flash:
wasp> cp.b 0x80000000 0x9f020000 0x3c00003. Set up the boot
wasp> bootm 0x9f020000## Booting image at 9f020000 ...Uncompressing Kernel Image ... OKStarting kernel ...4. Done.
As most other current TP-Link routers this device can be flashed và debricked without serial access. Basically, the procedure is as follows:
Set your PC to use the static IPhường. address 192.168.0.66 (the router will have sầu 192.168.0.86 or 192.168.0.2 for v13)
Chuyên mục: Công Nghệ