Check out this paper to study how to fix the issue “Kingston DT 101 G2 not recognized in Windows 10/8/7” quickly and simply.
Bạn đang xem: Download firmware usb kingston dt101 g2 8gb

Analysis
The issue aforementioned can be related to one or more factors listed below:
It is infected with virus. If so, you can run anti-virus software.
The partition table of it is corrupted.
The file system of Kingston DT 101 G2 is corrupted.
There are bad sectors on the Kingston DT 101 G2 USB.
Solutions
To fix Kingston DT 101 G2 not recognized in Windows 10/8/7 issue, you can refer to the following solutions.
Note: Before you take steps to fix the issue, it is highly recommended to recover data from Kingston USB, if there are necessary files on it. To recover data, you can turn to data recovery software like Recuva, PhotoRec and so on.
Option 1. Check Kingston DT 101 G2 USB for bad sectors
As listed above, bad sectors can be a cause of Kingston DT 101 G2 USB not working. To confirm whether there is a bad sector, you can employ Disk Surface Test in AOMEI Partition Assistant Standard.
Free download it and have a try!
Download FreewareWin 10/8.1/8/7/XP
Secure Download
1. Install and run it. In the main console, locate Kingston Data Traveler USB, right-click it and choose Surface Test.
Xem thêm: Cho Em Hỏi Xí Muội Nó Được Làm Từ Quả J`, Và Ăn Xí Muội Có Tốt Không
2. In the pop-up window, check Quick Test and click Start.
Option 2. Rebuild Partition Table for Kingston USB flash drive
When the problem happens out of damaged table, you can rebuild partition table of Kingston USB. Here are the detailed steps:
1. Fire up AOMEI Partition Assistant Standard, right-click the Kingston USB and go to Rebuild MBR

2. It pops up a window where you should choose the MBR type based on your current OS.

3. Go back to the main interface. Click Apply and Proceed to commit operation.

Notes:
Option 3. Format Kingston DT 101 GB USB
If the file system of Kingston USB is corrupted or not supported by Windows operating system, it won’t be working. In such condition, you can format it with a file system compatible with Windows through the steps given below:
PS.: What I want to prompt you is that formatting will destroy all data.
1. Press Windows +Rat the same time, input "balkanpoliticalclub.net" and click "OK".
2. Then, run commands as follows:
list disk
select disk n, n refers to the disk number of Kingston USB that not working
list partition
select partition m, “m” is the partition number of the partition that you’ll format
format fs=ntfs quick
exit
Tips:
You can also choose to format USB drive with FAT32 or exFAT.
What if Kingston USB not showing up in Explorer?
You can repair Kingston Data Traveler 101 G2 USB detected but not accessible problem with the methods presented above. However, what should you do when you can’t view the USB in Windows Explorer? Keep reading the following text to get an answer.
If your Kingston USB is not assigned with a drive letter, it won’t appear in File Explorer. If so, you can assign a drive letter to it in Disk Management.
If it still disappears in Disk Management, you can update or reinstall driver for the Kingston USB in Device Manager
If you have disabled the USB interface in BIOS, it won’t show up in Device Manager. Here, you can enable USB device in BIOS.