1 click tạo usb boot

Instructions on how to lớn create USB Boot Multiboot Full with 1 Cliông chồng MultiBoot v5.0, Boot both UEFI and Legacy are extremely simple.

Bạn đang xem: 1 click tạo usb boot

Perhaps integrating the rescue tool kit inkhổng lồ the USB to lớn install or recover data of the PC - Laptop is not too strange. However, with the introduction of data standards of the new hard drive sầu such as UEFI - GPT, the software for checking the device"s access & output have to be changed, namely the UEFI standard has been released. Life gradually replaced Legacy Btiện ích ios.

Learn some BIOS standards

Before starting to lớn create this holy USB Boot, please prepare a little knowledge.

Create USB Boot lớn rescue repair computer software, there are countless types. However, you must understvà why we need to lớn create USB Boot for both UEFI & Legacy standards without creating other simple DLC boot kits.

You can quickly scroll to lớn the over of the article to find the download links if you know all, but I still should read this analysis carefully, if there is a problem, you can fix it yourself.

What are UEFI and Legacy standards?

Put simply, it"s the interface that appears before your "loading windows" screen runs. This software checks the input đầu vào and output devices of your computer, such as hard drives, keyboards, mice, etc., as a bridge between the Windows software và all hardware devices.

Back khổng lồ the UEFI và Legacy standards, this is a software available on the motherboard so we can vày nothing but "choose" lớn go back và forth between these two standards, only the new motherboard will have to lớn choose.

Legacy: Often called the traditional BIOS (Basic Input đầu ra system), this software is stored on the computer"s motherboard. It is a danh sách of instructions for running devices khổng lồ start the computer"s OS.

When the computer is turned on, Legacy is run first, it checks the RAM và processor on your computer. Then check the devices attached on the computer such as printers, keyboards, mice . finally boot options such as CD-ROM, hard drive sầu, USB, LAN .

UEFI ( Unified Extensible Firmware Inter ): Uses no different from its predecessor, Legacy BIOS , UEFI was developed with the purpose of solving weaknesses compared khổng lồ its predecessors, operating strongly & gradually replacing. replace the Legacy BIOS standard . Support for 64-bit versions of Windows và from Windows 8 và above. The UEFI standard sometimes supports 32-bit editions.

UEFI is supposed lớn boot significantly faster, but I find it still not quite right, mostly because of whether you have a svào configuration or not.

What are standard MBR & GPT hard drives?

Generally the characteristics of these two standards are the same, both are the information management standard of the hard drive sầu, only different from the time of launch, tốc độ và memory.

MBR GPT Born in 1983 at the same time as IBM PS DOS 2.0 MBR - Master Boot Record. Until 20trăng tròn, it is still quite popular. Born in 2010 GPT stands for of GUID Partition Table. This is a new standard, gradually replacing the MBR standard. The GPT standard does not have sầu the same limitations as the MBR, but it is not very comtháng. High compatibility with other hardware such as mainboard, supports all Windows operating systems from the old lớn the lademo GPT standard can support hard drives up to lớn 256 TB and allows the use of up to 128 partitions on the drive. Only support up to lớn 2 TB capacity. Create up lớn 4 partitions on a hard drive. For example, create 4 partitions of C, D, E, F . Compatibility with old software is poor, on GPT hard drive, you can only install 64-bit operating systems

Conclude:

Let"s return lớn two questions:

Why is it necessary khổng lồ create USB Boot for both UEFI & Legacy standards?What happens when using UEFI - GPT USB Boot plugged inlớn a PC that has Legacy - MBR standard?

Yes, with the above documents, you probably have sầu the answer, surely the motherboard will not recognize your USB, so you have lớn create another USB boot using the standard Boot Legacy - MBR.

This article will help you not to buy more USB to create 2 different types of boot, no matter what your computer is, you will still be able to boot into lớn all.

Xem thêm: Cách Điều Tra Các Transaction Có Performance Chậm Bằng New Relic Là Gì

How khổng lồ create USB BOOT with 1 Clichồng MultiBoot v5.0

Advantages - Uses of the software:

Boot tư vấn for both Legacy và UEFI standards.Full support for a computer technician . specialized in ghost walking, for example, the lachạy thử update in 2020Create a USB boot with one click và you"re doneAutomatically divide USB inlớn 2 partitions including:The partition contains the Boot Menu data.Multiboot name partition is empty with the kích cỡ you choose, NTFS format for you lớn comfortably store data like a regular USB. (The maximum size of each file is not limited as the Fat32 format - only supports a maximum of files under 4GB).

Tools to prepare:

Proceed to install:

Step 1: Insert the USB disk you need to lớn create into lớn your computer, in this article, I use a Kingston DataTraveler 3.0 USB with a capathành phố of 16GB.

* Note : Baông chồng up all data on USB before doing, because when doing data in USB will be erased.

Step 2 : After downloading, extract the password: gameportable.net

The toolkit includes 3 after unpacking the following file: bootice.exe pháo, Multiboot 5.0.iso& Run.exe.

Step 3 : To start creating, run the file Run.exewith Administrator privileges.

Step 4 : After running the file with Administrator privileges, the software will appear 1 Click Multiboot 5.0 2019 asking for the USB disk number you want lớn create. In my article USB is at position 3, so enter 3 và press Enter to lớn continue.

Step 5: Wait.

The process of creating the Boot Menu starts, including deleting, partitioning and formatting the USB disk, unpacking & copying the contents of the Multiboot_5.0.iso file khổng lồ the USB disk, etc.

The software will complete và close on its own.

Step 6: Next we use bootice.exe cộ included with the toolkit 1 Clichồng MultiBoot v5.0 khổng lồ kiểm tra the partition of the USB disk after creating.

Right-clichồng on the bootice.exerun tệp tin with Administrator privileges

If you see the tool has divided the USB disk into 2 partitions as required is successful. So complete the USB rescue rescue computer with 1 Cliông chồng MultiBoot toolkit v5.0.

MultiBoot v5.0 2020 User Guide

Restart the computer, press the key to lớn activate Boot Options ( for example, HP.. machine press F9, DELL machine press F12, . ), select USB boot into LEGACY or UEFI mode.